FTP/LSZH Armoured Cat 6

BATT Part No: 91550
Conductor: Co 0.55mm bare
Insulation: PE
Diameter: 1.12 ± 0.02mm
Colour code: IEC 708-1
Shielding: Plastic laminated aluminium foil longitudinally with drain wire 0.45 tinned
Inner jacket: Halogen free compound
Diameter over inner jacket: 8.0 ± 0.2mm
Armour: Steel wire braid with wire 0.24
Outer jacket: Halogen free compound
Colour: Grey
Diameter: 11.0 ± 0.2mm
Electrical Data
Loop resistance: Max 190 Ohm/km
Insulation resistance: Min 5 gOhm x km at 20°C
Operating capacity: Nom. 50nF/km
Char. Impedance at 100MHz: 100Ohm ±5 Ohm
Test voltage: 700V/AC
Velocity of propagation: pp. 0.67c
Signal term: Max 480 ns/100m
Running time difference: Screening att to 250MHz >40dB
Coupling resistance: Mechanical Data
Temperature range: Stationary: -25°C to + 70°C
Moves: -5°C to +50°C
Bending radius: 10 x diameter during installation
5 x diameter fixed
Max tractive force: 280N
Applications: IEEE 802.3: Ethernet 10 Base-T, Fast Ethernet 100Base-T, Gigabit Ethernet 1000 Base-T, IEEE 802.5: ISDN, FDDI, ATM
Standards: EN 50288-5-1, EN 50173, ISO/IEC 11801 2. Ausgabe, IEC 61156-5, TIA/EIA-568-B.2, EN 60332-1, EN 60332-3, EN 61034, EN 50267, IEC 60754-2, IEC 61034

Whilst Selectus LLP endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Selectus LLP is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.