Fieldbus Type A SWA Cable

BATT Part No: 91574
Applications: FieldBus systems used in industrial control
Conductor
Size 18 awg
Material Tinned copper
Number of pairs 1
Number of cores 2

Nominal cross section 18AWG
Insulations of conductors:
Material PE
Insulation thickness 0.70 mm
Insulation diameter 2.6 +/- 0.1 mm
Colour Orange - Blue
Overall Aluminium Screen
Material All / Polyester Tape
Drain wire Tinned copper 0.50mm²
Bedding
Material LSZH
Nominal thickness 0.8 mm
Nominal diameter 7.0 mm
Armouring SWA
Material Steel wires
Diameter of wire 0.90 mm
Diameter over armour 8.70 mm
Outer Sheath
Material LSZH
Nominal thickness 1.40 mm
Nominal outer diameter of cable 11.50 +/- 1.00 mm
Colour Orange
Maximum DC resistance per core at 20°C 19.20 Ohm/Km
Maximum insulation resistance at 20°C >5 G Ohm/km
Mutual capacitance: Inducance: Test voltage: 2000 volts
Standards: IEC 60332-3 cat C

Whilst Selectus LLP endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Selectus LLP is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.    

Email