BFOI (ic) Cable Armoured 250V

Applications: BFOI (ic) armoured cable

Conductor: Stranded plain annealed copper wires as per IEC 60228, class 2.

Fire resisting layer: Mica/glass tape

Insulation: XLPE as per IEC60092-351

Twisting: Two / Three insulated cores shall be twisted together to form a pair/triad.

Individual screen: Screened by AL/PS tape with tinned copper drain wire.
Each pair/triad is wrapped with polyester tape to prevent electrical contact with adjacent pairs/triads.

Cabling: Screened pairs/triads shall be cabled. Flame retardant and non-hygroscopic fillers may be used. Suitable tape(s) may be applied to the cabled core.
Collective screen: Screened by AL/PS tape with tinned copper drain wire. A suitable tape may be applied on the collective screen. In case of 250V BFOI (i) cable, collective screen is omitted.

Inner covering: Non hydroscopic material

Armour: Braid of plain annealed copper wire. Coverage density min. 90%

Sheath: SHF1 as per IEC60092-359

Colour: Black

Core Identification:  Pair: Light blue, black and numbered

Voltage: 250V

Standards:

Design Guide: IEC 60092-350 and IEC 60092-376
Insulation material: IEC 60092-351, XLPE
Sheath material: IEC 60092-359, SHF1
Flame retardant: IEC60332-1 and IEC 60332-3 Category A
Fire resistance: IEC 60331-21, 1, 2
Halogen content: IEC60754-1, 0.5%↓
Smoke emission: IEC 61034, 60%↑
Cold bend/impact: CSA22.22 Number 0.3 (-40°C / -35°C)
Max rated conductor temperature: 90°C
Approvals: ABS, Bureau Veritas and Lloyds Register

UL1581 

Whilst Selectus LLP endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Selectus LLP is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Email