RE-2X (St)H

Application: These cables are designed to connect electrical instrument circuits and provide communication services in and around process plant (e.g. Petrochemical industry etc.). Not suitable for direct buried application

Conductor: Plain annealed copper wire, 7 strand

Colour code: Blue and black numbered

Wrapping: At least 1 layer of plastic tape, 0.023mm

Collective screen: 0.026mm aluminium / PETP tape over tinned copper drain wire

Outer sheath: Thermoplastic halogen free, low smoke, LSZH

Colour: Blue or Black

DC Resistance per core at 20°C: Max 12.6 Ω/km
Insulation resistance at 20°C: Min 5000 MΩ*km
Mutual capacitance: Max 140 nF/km
Inductance: Max 1 mH/km
Test voltage: Core / Core: 2000V
Core / Screen: 2000V
L/R Ratio: 25 max µH/Ω
Operating voltage: 500V
Temperature range: During operation: -30°C up to +90°C
During installation: -5°C up to +50°C
Min bending radius: 6 x cable diameter
Max pulling tension: 140N/mm²
Weight approx.: 73 kg/km

Standards:EN50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control. Part 7 - sectional specification for instrumentation and control cables. Flame retardant to IEC60332-3, Oil resistant to ICEA S-82-552, UV resistant to UL 1581. This cable type is suitable for use in Zone 1 and Zone 2 only when installed with the correct ATEX Approved Accessories/Equipment

Whilst Selectus LLP endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Selectus LLP is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Email