RE-2X (St) YSWAY-TiMF IAM/CAM/SWA/PVC Instrumentatio

BATT Part Number: 86655

Cable type: EN 50288-7

Cores: Copper IEC 60228
Twisted in triads (upto 1.50mm² lay length 100m, for 2.50mm² 150mm)

Composition: 7 x 0.52mm

Resistance: 12.100 Ohm/km max

Mutual capacitance: 0.100 µF/km

L/R ration adjacent cores: 40

Insulation: XLPE 90°C

Thickness: 0.60mm

Shield: Aluminium/polyester tape of .05mm thickness with tinned copper drain wire

Inner sheath: PVC FR

Sheath thickness: 1.10mm

Sheath colour: Black

Metal armour: Galvanised steel wire armour, covering 90%. Diameter 1.25mm

Overall sheath: PVC FR

Sheath thickness: 1.50mm

Colour: Blue

Overall diameter: 20.60mm

Diameter under armour: 15.10mm

Weight: 799 K/km

Standards: EN50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control. Part 7 - sectional specification for instrumentation and control cables. Flame retardant to IEC60332-3, Oil resistant to ICEA S-82-552, UV resistant to UL 1581. This cable type is suitable for use in Zone 1 and Zone 2 only when installed with the correct ATEX Approved Accessories/Equipment

Whilst Selectus LLP endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Selectus LLP is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Email