BS5308 Cable Part 1 Type 1 IAM CAM

Applications: Indoor installations generally used within industrial process plants and for data & voice transmission services. Also used for the interconnection of electrical equipment and instruments, particularly in and around process plants, where transducer generated signals are transmitted through marshalled circuits to panels, controllers and associated devices
Part 1 cables are widely used throughout the petroleum industry.
Type 1 unarmoured cables are generally for indoor applications

Conductors: Plain annealed copper conductor to BS6360/IEC60228
0.5sqmm & 0.75sqmm class 5 Flexible copper
1.0sqmm class 1 solid copper,
1.0sqmm, 1.5sqmm & 2.5sqmm class 2 stranded copper

Insulation: PE (Polyethylene) insulation to IEC60227 for PVC sheathed cables

Core identification: See colour code link in technical information

Screen: IAM, CAM 

Sheath/Jacket: PVC (Polyvinyl-Chloride)

Colour: Black or Blue

Voltage: 300/500v

Pairing: Two insulated conductors uniformly twisted together with a lay not exceeding 100mm. Two pair cables without individual pair screens shall have four cores laid in quad formation around a central dummy. Pairs are assembled together using the reciprocating lay technique

Temperature Range: Operating -15°C to +65°C, Installation 0°C to +50°C

Bending Radius: 5 x overall diameter

Binder tape: A non-hydroscopic binder tape is applied over the cable assembly

Standards: BS5308 Part 1 ,Insulated cables, instrumentation, PE
BS6234: Specification for polyethylene insulation and sheath of electric cables
BS EN 60332-3-Cat C

Whilst Selectus LLP endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Selectus LLP is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.