N2XH, N2XCH

Application: Halogen-free power cables with enhanced resistance to fire are used mostly in areas where harm to human life or material must be prevented in case of fire such as industrial and public buildings, hotels, subway systems, hospitals etc. These cables are suitable for dry and wet environments as well as for outer application but are not suitable for direct burial into earth or water.

Conductor: Solid or stranded Cu core according to DIN VDE 0295 cl. 1 or 2, IEC 60228 cl. 1 or 2
Cores stranded in layers with optimal lay length
For N2XCH version, concentric conductor of Cu tape or Cu wire

Core identification: 2-core cable: blue/brown
3-core cable: brown/black/grey
4-core cable: blue/brown/black/grey
7 core and above: black cores with white numbering

Insulation: Halogen free, cross-linked polyethylene compound

Sheath: Halogen free sheath of thermoplastic polymer compound

Colour: Black

Minimum bending radius: 15 x cable diameter, multicore approx. 12 x cable diameter

Temperature range: During installation from -5°C to +50°C; fixed from -40°C to +90°C

Nominal voltage: Uo/U 0,6/1 kV

Test voltage: a.c. 4000 V

Standards: Flame-retardant to DIN VDE 0482 part 266-2/HD 405.3/BS 4066 PT3/EN 50266-2/IEC 60332-3
Low corrosiveness of combustion gases to DIN VDE 0482 part 267/BS 6425 PT2/EN 50267-2-2/IEC 60754-2
Halogen-free to DIN VDE 0482 part 267/BS 6425 PT1/EN 50267-2-1/IEC 60754-1
Smoke density to DIN VDE 0482 part 268/HD 606/BS 7622 PT1,PT2/EN 50268-1,-2/IEC 61034-1,-2
Power and control cable according to DIN VDE 0276 part 604

Whilst Selectus LLP endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Selectus LLP is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.